Cooling Tower Chemicals

ACUTMER 3221 is suitable for for very high hardness, Silica, Iron and high TDS waters in the cooling systems. This is formulated using optimum quality chemical compounds keeping in mind the set industry norms. Further, this Antiscalants cum Corrosion Inhibitor is available in diverse packaging options at highly competitive prices
Iron Dispersant is used for preventing scale formation in the heat exchanger and are well known due to their superior quality.
Bio dispersants is a high-performance cooling water dispersant that incorporates powerful surface active agents. It is scientifically formulated for the treatment of cooling systems including re-circulating and once-through cooling water systems.
Bio-cides are referred to as compounds that help in the complete removal of or prevention of biological fouling. The various types of Bio-cides function in different applications or behaviour. Though a simple chlorine compound or a peroxide compound are common example of Bio-cides, but the ones that are synergistically formulated for a given purpose eventually ends up delivering a high level of performance. Chemtex manufactures a wide range of oxidizing and non-oxidizing Bio-cides.
Chemtex's Non-Oxidizing Bio-cide is an advanced, non-oxidizing microBio-cide developed specifically for the control of microbiological growth in open and closed circuit cooling water & glycol, brine systems. The products which we cater under Non-Oxidizing Bio-cide are BKC 50 (Benzalkonium Chloride), CIT/MIT 14%, Isothaizolinone, SDMC Carbamate, PDMC Carbamate, etc.
Chemtex's Non-Oxidizing Bio-cide is very effective against all types of bacteria, biofilms, fungi and slime forming organisms. It is non-foaming, non-oxidizing and totally chlorine free, which makes it ideal for use in closed loop applications of water, brine and glycol systems.
Chemtex's Non-Oxidizing Bio-cide shows excellent efficacy at very small dosage. These formulations are generally eco-friendly and biodegradable and pose a high efficacy against coliform, yeast other than bacteria.
Acidic Cleaner is a fast acting, acid cleaner for textured, non-polished, natural and manufactured surfaces. Acidic Cleaner removes sanded grout and mortar residue, joint cement, lime and hard water deposits, efflorescence, rust and other heavy dirt and grime.
The basics of an acid neutralizer water treatment system High levels of acid entering your plumbing can turn into a serious problem. Although usually not dangerous to drink, high acid content water can cause corrosion in copper plumbing, a metal resistant to normal forms of corrosion, and pinhole leaks. Acidity will also cause ugly green and blue stains to form on your fixtures.
High levels of acid in your water can be detected with a pH test (ask your plumber to do this). A low pH number indicates too much acidity. To counteract this, a whole-house acid neutralizer can be installed. There are a number of different types of neutralizers. The most common is the calcite acid neutralizer tank. A calcite system injects reactive magnesium oxide into the water supply which dissolves into the water and neutralizes the acid. The calcite in the tank must be replaced routinely, although this is a simple task.
Using a calcite acid neutralizer may cause an increase in the hardness of your water (increased levels of calcium and magnesium), and some homeowners will also opt to have a water softener, which raises the sodium level of the water, installed to help balance the water.

Design by info-net